FEP Film with Frame for Anycubic Photon Mono 2 and Anycubic Photon Mono 4 198 x 130 mm 1 pcs

FEP Film with Frame for Anycubic Photon Mono 2 and Anycubic Photon Mono 4 198 x 130 mm is a replacement release film for the resin vat of compatible Anycubic resin 3D printers. The film works as a separating layer between the liquid resin, the bottom of the vat and the printed model during each layer curing cycle.

This FEP film is supplied with a frame, which makes replacement easier and faster. The framed design helps reduce installation mistakes, keeps the film properly positioned and is convenient for regular maintenance of the resin vat.

Compatibility

• Anycubic Photon Mono 2
• Anycubic Photon Mono 4

Main advantages

• Compatible with Anycubic Photon Mono 2 and Anycubic Photon Mono 4
• Supplied with frame for easier installation
• Film size 198 x 130 mm
• Helps separate each printed layer from the vat bottom
• Suitable for regular resin vat maintenance
• Helps keep resin printing stable when installed correctly
• Useful replacement part for worn, cloudy, scratched or damaged vat film

Technical specifications

Product name	FEP Film with Frame for Anycubic Photon Mono 2 and Anycubic Photon Mono 4
Compatible models	Anycubic Photon Mono 2, Anycubic Photon Mono 4
Film size	198 x 130 mm
Film type	FEP
Design	With frame
Quantity	1 pcs
Application	Replacement release film for resin vat
Printing technology	LCD resin 3D printing

What FEP film is used for

FEP film is installed at the bottom of the resin vat and plays an important role in resin 3D printing. During printing, every layer is cured through the LCD screen, and after curing the model must release from the film surface. A clean and properly installed FEP film helps provide stable layer separation, accurate printing and reliable model adhesion to the build platform.

If the film becomes scratched, cloudy, stretched, punctured or contaminated with cured resin, print quality may become unstable. Damaged vat film can cause failed prints, surface defects, strong release force, resin leakage and possible LCD screen damage.

Advantages of film with frame

FEP film with frame is easier to replace than a loose film sheet because the film is already fixed in a framed structure. This helps save time during maintenance and reduces the risk of uneven tension or incorrect positioning.

This option is especially useful for users who print regularly and want a simple replacement solution for the resin vat of Anycubic Photon Mono 2 or Anycubic Photon Mono 4.

When to replace the FEP film

• When deep scratches appear on the surface
• When the film becomes cloudy in the printing area
• When dents, deformation or stretching are visible
• When resin starts leaking through the vat bottom
• When printed layers release from the film with difficulty
• When print failures become frequent without changes in settings
• After mechanical damage from tools or failed print residues

Installation recommendations

1. Turn off the resin 3D printer and remove the resin vat.
2. Pour the remaining resin through a filter into a clean container.
3. Clean the vat carefully with a soft cloth.
4. Remove the old FEP film or old framed film from the vat.
5. Install the new FEP film with frame in the correct position.
6. Check that the frame sits evenly and securely.
7. Do not overtighten the fixing elements.
8. Before adding resin, make sure the film is clean, transparent and undamaged.

Care recommendations

• Do not clean the FEP film with sharp metal tools
• Do not press strongly on the film surface
• Do not allow cured resin to remain on the film
• Remove failed print residues carefully
• Check the film before each print for scratches, punctures and cloudy areas
• Use soft cloths and suitable cleaning methods

FEP, NFEP and ACF difference

FEP film is a classic release film for resin 3D printing. It is widely used in LCD resin printers and is suitable for standard printing tasks. It provides a smooth release surface and stable optical transparency when clean and undamaged.

NFEP film usually has lower release force compared with standard FEP film and can improve printing reliability for more complex models. ACF film is often used for high speed resin printing because it helps reduce layer separation resistance, but it may have different optical and surface properties.

For Anycubic Photon Mono 2 and Anycubic Photon Mono 4, this FEP film with frame is a practical replacement part for standard resin vat maintenance.

FAQ

Is this FEP film compatible with Anycubic Photon Mono 2?

Yes. This FEP film with frame is compatible with Anycubic Photon Mono 2.

Is this FEP film compatible with Anycubic Photon Mono 4?

Yes. This film is also compatible with Anycubic Photon Mono 4.

What does with frame mean?

It means that the FEP film is supplied together with a frame, making installation into the resin vat easier and more convenient.

Can I use damaged FEP film?

No. Damaged FEP film should be replaced because resin can leak through punctures or cracks and damage the printer screen.

Does FEP film affect print quality?

Yes. A clean, transparent and correctly installed FEP film helps ensure stable layer separation, accurate curing and reliable resin 3D printing.

How many films are included?

The package includes 1 pcs FEP film with frame.