Anycubic PLA Silk Christmas Red Filament AHSCCR is a 1.75 mm decorative PLA Silk filament with a deep festive Christmas Red #D22630 shade and a smooth glossy silk like finish. It is designed for FDM 3D prints where bright color, glossy surface quality, decorative appearance and premium visual effect are especially important.
Christmas Red is a deep vibrant red color that works especially well for Christmas ornaments, Santa figurines, festive decorations, souvenirs, gift models, logos, trophies, statues, interior elements and decorative prints. Thanks to the glossy silk finish, printed models look more expressive than standard PLA prints, while the red color stands out well in product photos, gift displays and seasonal decoration sets.
| Product Name | Anycubic PLA Silk Christmas Red Filament |
| SKU | AHSCCR |
| Material Type | PLA Silk |
| Color | Christmas Red |
| HEX Code | #D22630 |
| Filament Diameter | 1.75 mm |
| Net Weight | 1 kg |
| Filament Type | Aesthetic decorative PLA filament |
| Print Surface | Glossy silk like finish |
| ACE Compatibility | Compatible |
| Intelligent Identification | Supported |
| Reusable Filament Spool | Supported |
| Printing Temperature | 210-240 โ |
| Heated Bed Temperature | 55-65 โ |
| Recommended Printing Speed | 50-250 mm/s |
| Nozzle Size | ≥0.4 mm |
| Dry Out Before Use | Recommended |
| Drying Condition | 55-65 โ, 6-8 h |
| Cooling | Active cooling is recommended for clean surfaces and stable overhangs |
| Printing Technology | FDM / FFF 3D printing |
| Density | 1.22 g/cm³ |
| Melt Index | 9±1 g/10 min |
| Melting Point Temperature | 164 โ |
| Vicat Softening Temperature | 54 โ |
| Heat Deflection Temperature | 53 โ at 0.45 MPa |
| Young's Modulus X-Y | 2000±200 MPa |
| Tensile Strength X-Y | 37±4 MPa |
| Tensile Strength Z | 12±4 MPa |
| Elongation at Break X-Y | 28±5% |
| Bending Modulus X-Y | 2400±160 MPa |
| Bending Strength X-Y | 66±4 MPa |
| Izod Impact Strength X-Y | 20±2 kJ/m² |
Anycubic PLA Silk Christmas Red Filament 1.75 mm is compatible with most FDM 3D printers that support 1.75 mm PLA filament and a nozzle temperature range of 210-240 โ.
It can be used with Anycubic, Creality, Bambu Lab, Prusa, Elegoo, Artillery, Sovol, Flashforge and other compatible FDM 3D printers. 1.75 mm filament may also be used with Bambu Lab AMS when the spool fits correctly and the filament is loaded properly. Intelligent Identification works only with compatible Anycubic systems, requires an internet connection and supported Anycubic intelligent identification-compatible filament.
Yes. PLA Silk is suitable for beginners and is easier to print than PETG, ASA or TPU. Correct nozzle temperature, print speed and cooling help achieve a better glossy silk like finish.
The recommended printing temperature is 210-240 โ.
The recommended heated bed temperature is 55-65 โ.
No. An enclosed chamber is not required for PLA Silk printing.
Yes. It can be used with compatible 1.75 mm FDM printers that support the required temperature range.
Drying is recommended if the spool has been open for a long time or if extrusion becomes unstable. Use 55-65 โ for 6-8 h.
Christmas Red is a deep festive red shade with a glossy silk like finish. It is better suited for decorative models, Christmas ornaments, souvenirs and prints where a bright visual effect is important.
Christmas Red is especially suitable for Christmas ornaments, Santa figurines, tree decorations, festive decor, souvenirs, gift models, logos, awards and bright decorative prints.