Anycubic PLA Silk Tri Color Red Yellow Green Filament AHSC15 is a 1.75 mm decorative tri color PLA Silk filament with a bright Red Yellow Green color combination. It is designed for FDM 3D prints where a vivid multicolor visual effect, silky gloss, strong color transition and premium surface appearance are especially important.
The combination of #D22630, #F3D03E and #006F44 creates a shifting tri color effect when the model is rotated: one side shows a rich red tone, another side reveals a bright yellow silky highlight, and another angle displays a deep green silk accent. This effect works especially well on decorative models, fantasy figurines, dragons, gaming characters, souvenirs, logos, art objects, cosplay parts, festive decor and presentation prints.
| Product Name | Anycubic PLA Silk Tri Color Red Yellow Green Filament |
| SKU | AHSC15 |
| Material Type | PLA Silk Tri Color |
| Color | Red Yellow Green |
| HEX Code | #D22630, #F3D03E, #006F44 |
| Filament Diameter | 1.75 mm |
| Net Weight | 1 kg |
| Filament Type | Aesthetic decorative PLA filament |
| ACE Compatibility | Compatible |
| Intelligent Identification | Supported |
| Reusable Filament Spool | Supported |
| Printing Temperature | 210-240 โ |
| Heated Bed Temperature | 55-56 โ |
| Recommended Printing Speed | 50-250 mm/s |
| Maximum Volume Speed | 8 mm³/s |
| Nozzle Size | 0.4 mm or above |
| Dry Out Before Use | Recommended |
| Drying Condition | 55-65 โ, 6-8 h |
| Cooling | Active cooling is recommended for a clean decorative surface |
| Density | 1.22 g/cm³ |
| Melt Index | 9±1 g/10 min |
| Melting Point Temperature | 164 โ |
| Vicat Softening Temperature | 54 โ |
| Heat Deflection Temperature | 53 โ at 0.45 MPa |
| Young's Modulus X-Y | 2000±200 MPa |
| Tensile Strength X-Y | 37±4 MPa |
| Tensile Strength Z | 12±4 MPa |
| Elongation at Break X-Y | 28±5% |
| Bending Modulus X-Y | 2400±160 MPa |
| Bending Strength X-Y | 66±4 MPa |
| Izod Impact Strength X-Y | 20±2 kJ/m² |
Anycubic PLA Silk Tri Color Red Yellow Green Filament 1.75 mm is compatible with most FDM 3D printers that support 1.75 mm PLA filament and a nozzle temperature range of 210-240 โ.
It can be used with Anycubic, Creality, Bambu Lab, Prusa, Elegoo, Artillery, Sovol, Flashforge and other compatible FDM 3D printers. 1.75 mm filament may also be used with Bambu Lab AMS when the spool fits correctly and the filament is loaded properly. Intelligent Identification works only with compatible Anycubic systems, requires an internet connection and supported Anycubic intelligent identification-compatible filament.
Yes. PLA Silk Tri Color is suitable for beginners and is easier to print than PETG, ASA or TPU. Correct nozzle temperature, print speed and model orientation help achieve a better tri color silk effect.
The recommended printing temperature is 210-240 โ.
The recommended heated bed temperature is 55-56 โ.
No. An enclosed chamber is not required for PLA Silk printing.
Yes. It can be used with compatible 1.75 mm FDM printers that support the required temperature range.
Drying is recommended if the spool has been open for a long time or if extrusion becomes unstable. Use 55-65 โ for 6-8 h.
Tri Color contains three colors in one filament strand. During printing, the model gets a more complex multicolor visual effect depending on the viewing angle, part geometry and model orientation on the build plate.
Red Yellow Green is especially suitable for bright decorative models, fantasy figurines, dragons, souvenirs, festive decor, logos, art objects, cosplay elements and prints that need a red yellow green visual accent.