✨ Anycubic PETG Grey Filament 1.75 mm 1 kg for 3D Printer

⭐ Key Advantages

• ✅ Professional grey color — a universal shade for technical, engineering and commercial models.
• 💪 Improved strength — better suited for functional parts than standard PLA.
• 💧 Moisture resistance — a good choice for parts exposed to humid environments.
• 🌦️ Practical outdoor use — suitable for outdoor and utility parts with proper print settings.
• 🧪 Chemical resistance — PETG handles contact with household chemicals and detergents better than many standard materials.
• 📐 Stable geometry — low shrinkage helps maintain accurate model dimensions.
• 🔗 Good layer adhesion — layers bond reliably for stronger printed parts.
• ⚡ Printing speed up to 250 mm/s — suitable for modern high-speed FDM printers.
• 🚀 ACE Compatibility — compatible with Anycubic ACE / ACE Pro systems.
• 🎯 Bambu Lab AMS support — suitable for Bambu Lab AMS when used with a compatible 1.75 mm spool and correct loading.
• ♻️ Reusable spool support — practical for more economical filament use.

📋 Technical Specifications

⚙️ Recommended Printing Parameters

📊 Physical Properties

💪 Mechanical Properties

🧩 Best Applications

• ➤ engineering prototypes and test samples;
• ➤ electronics enclosures, controller housings and sensor cases;
• ➤ brackets, holders, mounts and adapters;
• ➤ workshop, garage, office and home utility parts;
• ➤ architectural and industrial-style models;
• ➤ decorative models with a neutral grey finish;
• ➤ functional parts requiring improved moisture resistance;
• ➤ educational models, presentation samples and production components.

🔧 3D Printer Compatibility

✅ Anycubic PETG Grey Filament Ø1.75 mm is compatible with most FDM 3D printers that support PETG and can reach a nozzle temperature of up to 250 ℃. It can be used with Anycubic Kobra, Anycubic Kobra 2, Anycubic Kobra 3, Creality Ender, Creality K1, Bambu Lab A1, Bambu Lab P1P, Bambu Lab P1S, Bambu Lab X1, Prusa, Elegoo Neptune, Sovol, Artillery, Flashforge, QIDI and other FDM printers using 1.75 mm filament.

🎯 For Bambu Lab AMS, the material is suitable as a standard 1.75 mm filament when the spool fits AMS dimensions or when a compatible reusable spool or adapter is used.

🛠️ Printing Recommendations

• ♨️ Dry the spool before printing, especially if it has been stored open for a long time.
• 🔥 Start with 240 ℃ nozzle temperature, then fine-tune within the 230–250 ℃ range.
• 🌡️ Use a 60–70 ℃ heated bed for stable adhesion.
• ↔️ Tune retraction and printing temperature to reduce stringing.
• 🌬️ Avoid excessive cooling on the first layers.
• 🏠 For large parts, reduce speed and consider using an enclosed chamber.
• 🎯 When using Bambu Lab AMS, make sure the spool rotates freely, does not rub against the AMS housing and feeds filament correctly.

📦 Storage Recommendations

📦 PETG is hygroscopic, so the spool should be stored in a dry sealed bag or container with silica gel. If bubbles, popping sounds, rough surfaces, unstable extrusion or excessive stringing appear during printing, dry the filament at 55–65 °C for 6–8 hours.

⭐ Why Buy

⭐ Anycubic PETG Grey is a strong choice for users who need a durable, moisture-resistant and versatile material for daily and technical 3D printing. The grey color gives printed models a clean professional look, while PETG properties make the prints suitable not only for decorative use but also for practical functional parts.

❓ FAQ