Anycubic PLA+ Black Filament 1 kg 1.75 mm is a reinforced PLA+ filament for FDM 3D printers. It combines easy printing, stable feeding, improved strength and a deep black color. It is ideal for technical housings, functional parts, brackets, organizers, accessories, engineering prototypes, decorative models, souvenirs, fandom prints and professional-looking components.
Anycubic PLA+ is stronger than standard PLA, offers better toughness and prints easily on most open FDM 3D printers without requiring an enclosed chamber.
| Brand | Anycubic |
| Material | PLA+ filament |
| Color | Black |
| Color code | #212721 |
| Filament diameter | 1.75 mm |
| Net weight | 1 kg |
| Printing technology | FDM / FFF 3D printing |
| ACE Compatibility | Compatible ✅ |
| Intelligent Identification | Supported 🤖 |
| Reusable Filament Spool | Supported 🌀 |
| Drying before use | Recommended |
| Drying conditions | 45-50 ℃, 6-8 h |
| Recommended nozzle size | 0.2 mm or above |
| Nozzle temperature | 190-230 ℃ |
| Build plate temperature | 55-65 ℃ |
| Recommended printing speed | 50-200 mm/s |
| Cooling time | 9 s |
| Maximum volumetric flow rate | 12 mm³/s |
| Enclosed chamber | Not required |
| Density | 1.21 g/cm³ |
| Melt index | 4-10 g/10 min at 190 ℃ / 2.16 kg |
| Melting point | 162 ℃ |
| Heat deflection temperature | 50 ℃ at 0.45 MPa |
| Young’s modulus | 2790±250 MPa |
| Tensile strength | 45±5 MPa |
| Elongation at break | 12±1% |
| Bending modulus | 3980±360 MPa |
| Bending strength | 82±8 MPa |
| Izod impact strength X-Y | 28±1 kJ/m² |