UV LED Module for Anycubic Photon Mono M5s and Photon Mono M5s Pro
Description
UV LED Module for Anycubic Photon Mono M5s and Photon Mono M5s Pro is a replacement light module for Anycubic Photon Mono M5s and Anycubic Photon Mono M5s Pro resin 3D printers. The part is responsible for ultraviolet exposure of photopolymer resin during printing and is one of the key components of the layer curing system.
UV LED Module Photon Mono M5s | Photon Mono M5s Pro is used for printer repair when UV exposure becomes weak, resin curing is unstable, exposure is uneven, layer defects appear, resin does not cure or the light module fails. Replacing the module helps restore stable printer operation, accurate detail reproduction and even curing of photopolymer resin.
Advantages
- Compatible with Anycubic Photon Mono M5s and Anycubic Photon Mono M5s Pro
- Used for UV exposure of photopolymer resin
- Helps restore stable layer curing
- Suitable for printer repair and service maintenance
- Important spare part for accurate resin 3D printing
- Helps solve weak or uneven UV exposure problems
- Suitable for restoring print quality after light module wear
Technical Specifications
| Product name |
UV LED Module for Anycubic Photon Mono M5s and Photon Mono M5s Pro |
| Full product name |
UV LED Module Photon Mono M5s | Photon Mono M5s Pro |
| SKU |
S020194 |
| Part type |
UV LED module, light module, UV Light Board |
| Compatibility |
Anycubic Photon Mono M5s, Anycubic Photon Mono M5s Pro |
| Weight |
220 g |
| Package size |
256 x 141 x 24 mm |
| In the package |
UV Light Board |
| Printer type |
LCD resin 3D printer |
| Purpose |
Ultraviolet exposure and curing of photopolymer resin |
| Category |
Spare parts and accessories for Anycubic resin 3D printers |
When to Replace the UV LED Module
- Resin does not cure properly during printing
- Layer defects appear on printed models
- Exposure becomes weak or uneven
- The printer does not expose the layer
- The light module does not work correctly after an exposure test
- Printing becomes unstable with previous resin settings
- Diagnostics confirm a UV light module fault
Compatibility
This UV LED module is intended for Anycubic Photon Mono M5s and Anycubic Photon Mono M5s Pro. Before ordering, check the printer model and part number S020194. Anycubic Photon Mono M5, Photon Mono M7, Photon Mono M7 Pro, Photon Mono 4 Ultra, Photon Mono X and other models may require different light modules.
Installation Recommendations
- Disconnect the printer from power before replacement
- Remove the build platform and resin vat before disassembly
- Do not install the module while the power cable is connected
- Take a photo of cable connections before removing the old module
- Do not touch electronic components with wet hands
- Do not allow resin to get on the module, board or connectors
- After installation, check UV exposure with an exposure test
- If you do not have experience with 3D printer repair, contact a qualified technician
Usage Recommendations
- Keep the screen, resin vat and optical area clean
- Do not allow resin to leak inside the printer body
- Use correct exposure settings for the selected resin
- Do not start printing if cured resin remains on the film or screen
- After replacing the module, run a test print
- Clean dust and resin residue from the working area regularly
- If exposure quality changes, check the screen, cables, board and UV module
Suitable Applications
- Repair of Anycubic Photon Mono M5s
- Repair of Anycubic Photon Mono M5s Pro
- Replacement of a faulty UV LED module
- Restoration of stable photopolymer resin exposure
- Service maintenance of a resin 3D printer
- Solving layer curing problems
- Restoring print quality for miniatures, prototypes and functional parts
FAQ
Is this UV LED module compatible with Anycubic Photon Mono M5s
Yes, UV LED Module Photon Mono M5s | Photon Mono M5s Pro is compatible with Anycubic Photon Mono M5s.
Is this UV LED module compatible with Anycubic Photon Mono M5s Pro
Yes, this module is compatible with Anycubic Photon Mono M5s Pro.
What is the SKU of UV LED Module Photon Mono M5s and Photon Mono M5s Pro
The SKU of this part is S020194.
What does the UV LED module do
The UV LED module provides ultraviolet exposure for photopolymer resin and helps form each printed layer during resin 3D printing.
When should the UV LED module be replaced
Replacement is needed when UV exposure becomes weak, curing is uneven, layer defects appear, exposure is missing or diagnostics confirm a light module fault.
Is this module compatible with Anycubic Photon Mono M5
This product is listed for Anycubic Photon Mono M5s and Photon Mono M5s Pro. Compatibility with Photon Mono M5 should be checked separately with the correct part number.
Should exposure settings be checked after replacement
Yes, after replacing the light module, run an exposure test and a test print to confirm stable resin curing.