Anycubic PLA Silk Dual Color Black Red Filament AHSC17 is a 1.75 mm decorative dual color PLA Silk filament with an expressive Black Red color combination. It is designed for FDM 3D prints where strong color contrast, silky gloss, gradient visual effect and premium surface appearance are especially important.
The combination of #212721 and #D22630 creates a shifting visual effect when the model is rotated: one side shows a deep black tone, while the other side reveals a rich red silky highlight. This effect works especially well on fantasy models, dragons, dark characters, sci-fi prints, robots, decorative housings, figurines, statues, souvenirs, logos, cosplay parts, art objects and presentation prints.
| Product Name | Anycubic PLA Silk Dual Color Black Red Filament |
| SKU | AHSC17 |
| Material Type | PLA Silk Dual Color |
| Color | Black Red |
| HEX Code | #212721, #D22630 |
| Filament Diameter | 1.75 mm |
| Net Weight | 1 kg |
| Filament Type | Aesthetic decorative PLA filament |
| ACE Compatibility | Compatible |
| Intelligent Identification | Supported |
| Reusable Filament Spool | Supported |
| Printing Temperature | 210-240 โ |
| Heated Bed Temperature | 55-56 โ |
| Recommended Printing Speed | 50-250 mm/s |
| Maximum Volume Speed | 8 mm³/s |
| Nozzle Size | 0.4 mm or above |
| Dry Out Before Use | Recommended |
| Drying Condition | 55-65 โ, 6-8 h |
| Cooling | Active cooling is recommended for a clean decorative surface |
| Density | 1.22 g/cm³ |
| Melt Index | 9±1 g/10 min |
| Melting Point Temperature | 164 โ |
| Vicat Softening Temperature | 54 โ |
| Heat Deflection Temperature | 53 โ at 0.45 MPa |
| Young's Modulus X-Y | 2000±200 MPa |
| Tensile Strength X-Y | 37±4 MPa |
| Tensile Strength Z | 12±4 MPa |
| Elongation at Break X-Y | 28±5% |
| Bending Modulus X-Y | 2400±160 MPa |
| Bending Strength X-Y | 66±4 MPa |
| Izod Impact Strength X-Y | 20±2 kJ/m² |
Anycubic PLA Silk Dual Color Black Red Filament 1.75 mm is compatible with most FDM 3D printers that support 1.75 mm PLA filament and a nozzle temperature range of 210-240 โ.
It can be used with Anycubic, Creality, Bambu Lab, Prusa, Elegoo, Artillery, Sovol, Flashforge and other compatible FDM 3D printers. 1.75 mm filament may also be used with Bambu Lab AMS when the spool fits correctly and the filament is loaded properly. Intelligent Identification works only with compatible Anycubic systems, requires an internet connection and supported Anycubic intelligent identification-compatible filament.
Yes. PLA Silk Dual Color is suitable for beginners and is easier to print than PETG, ASA or TPU. Correct nozzle temperature, print speed and model orientation help achieve a better black and red silk effect.
The recommended printing temperature is 210-240 โ.
The recommended heated bed temperature is 55-56 โ.
No. An enclosed chamber is not required for PLA Silk printing.
Yes. It can be used with compatible 1.75 mm FDM printers that support the required temperature range.
Drying is recommended if the spool has been open for a long time or if extrusion becomes unstable. Use 55-65 โ for 6-8 h.
Dual Color contains two colors in one filament strand. During printing, the model gets a shifting visual effect depending on the viewing angle and the orientation of the part on the build plate.
Black Red is especially suitable for fantasy models, dragons, sci-fi prints, robots, figurines, souvenirs, logos, decorative prints, cosplay elements and models that need a strong black and red visual accent.